Top Menu

Room and Pillar Mining

Room and Pillar Mining

room and pillar

This drawing depicts the room and pillar method of underground mining. Most underground coal is mined by the room and pillar method, whereby rooms are cut into the coal bed leaving a series of pillars, or columns of coal, to help support the mine roof and control the flow of air. Generally, rooms are 20-30 feet wide and the pillars up to 100 feet wide. As mining advances, a grid-like pattern of rooms and pillars is formed. Workers drive bolts of up to eight feet long in the roof of the rooms to keep the rock above the coal seam from falling in. When mining advances to the end of a panel or the property line, retreat mining begins. In retreat mining, the workers mine as much coal as possible from the remaining pillars until the roof falls in. When retreat mining is completed, the mined area is abandoned.

There are two types of room and pillar mining — conventional mining and continuous mining. Conventional mining is the oldest method. In conventional mining, the coal seam is cut, drilled, blasted and then loaded into cars. Continuous mining is the most prevalent form of underground mining. In continuous mining, a machine known as a continuous miner cuts the coal from the mining face, obviating the need for drilling and blasting.

Become an Associate Member

united mine workers journal

hound dog

Music, Books, Movies

I need a union

UMWA Kerr Scholarship

contact Congress

United Mine Workers of America seal

United Mine Workers
of America

18354 Quantico Gateway Drive
Suite 200
Triangle, VA 22172